Manual

Thrush Co.

Manual #9636-0550

4.1 Pre-Installation Assembly (Continued)

4. Unbolt shipping bracket (Figure 4-2) from base of crate. Use provided lift lugs to

slowly lift the unit from the crate. Once cleared from the crate continue to raise the

Hot-Pak to a vertical position. While lowering unit onto legs (Figure 4-3) align

mounting tabs on the

Hot-Pak with mounting holes on the stand assembly. Use

supplied bolts to attach the

Hot-Pak to the stand. Remove shipping bracket and lift

lugs.

There is a potential for severe personal injury or death if proper rigging

procedures are not followed. Rigging should be done with proper

equipment and qualified personnel.

MOUNTING

TAB S(4 )

LIFTLU G

SHIPPING

BRACKET

Figure 4-2 Crated Assembly

5. Once the

Hot-Pak is attached to the stand, the unit can be bolted to the floor.

(Figure 4-3).

(4)BOLT,5/8‐11,1.5"

FLOOR

MOUNTINGHOLES

Figure 4-3 Stand Assembly #2