Owner's manual

Thrush Co.
Manual #9636-0555
Section 1
General Product Information
1.1 Overview
The Thrush Hot-Pak® has been carefully assembled and factory tested to provide years
of trouble-free service. This manual provides information to allow the installer/operator to
install, operate, service and maintain the Hot-Pak. In this manual the installer/operator
will find that multiple Hot-Pak models are covered. Visually these different models will
look very similar. The main difference between models is the height and diameter of the
unit. The model number designates the size of the unit (Figure 1-1 Overview). Although a
standard configuration is shown throughout this manual, optional equipment is available.
ModelDesignation
DSHE‐642
No.ofTubePasses
BundleLength(FT)
BundleDiameter(IN)
HorizontalDesign
SteamtoWater
DoubleWallConstruction(Optional)
ExtendedSurfaceArea(Optional)
36"
MAX.
WATERINLET
WATEROUTLET
STEAMINLET
CONDENSATE
DRAIN
Shell
Jacket
Insulation
TubeBundle
SAFETYRELIEFVALVE
OPENAREAOF
LASTBAFFLE
TEMPERATURESENSOR
CONNECTION
Figure 1-1 Overview