9 CUBE BOOKCASE & STORAGE UNIT 1/17
Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service or go to our website In order to assist you in a timely manner, please have the following information ready: Model # _______________________ Part Number or Letter_______________________ Purchased at ___________________Date of Purchase ___________________________ If you wish to return the product, please contact the retailer where
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A BR BL Fron t / Av ant ant t / Av Fron TOP QTY 1 RIGHT SIDE QTY 1 LEFT SIDE QTY 1 C C1 C2 BOTTOM DIVIDER (L&R Same) QTY 2 MIDDLE DIVIDER (L&R Same) QTY 2 D E TOP DIVIDER (L&R Same) QTY 2 FL vant t/A Fron TOP SHELF QTY 2 BOTTOM SHELF QTY 1 LEFT BACK PANEL QTY 1 F1 FR RIGHT BACK PANEL QTY 1 MIDDLE BACK PANEL QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service 5/17
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 6 3 CAM LOCK PIN CAM LOCK QTY 30 SETS ALLEN KEY QTY 1 5 4 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 36 a. M4 X 25 - QTY 2 ( 1 is extra ) b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM A FR F1 FL C2 C2 D BR C1 C1 BL D C C Front / Ava nt E Front / Ava nt Front / Ava nt 7/17
ASSEMBLY STEP 1 D C C nt / Ava rF ont E 1 3 1. Attach Bottom Dividers C to Bottom Shelf E using Allen Key Screws 1 through pre-drilled holes. 2. Align and insert Wood dowels on Bottom Dividers C into pin holes of Top Shelf D .
ASSEMBLY STEP 2 C1 C1 D t Avan / t n Fro 1. Align Dowels on Middle Dividers C1 with pre-drilled holes in centre of Top Shelf D and insert firmly.
ASSEMBLY STEP 3 2 2 D BL C1 C1 ant t / Av Fron D nt / Ava rF ont E 1. Align and insert dowels on C1 into pin holes of Top Shelf D . 2. Attach nine Cam Lock Pins 2 into Left Side BL using guide holes. 3. Align and insert Cam Lock Pins on Left Side BL into pre-drilled holes of D E . 4. Insert Cam Locks 2 into pre-drilled holes of D E . 5. Using a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY STEP 4 2 D 2 t/ Fron t Avan D vant t/A Fron BR 2 E nt / Ava rF ont 2 1. Insert nine Cam Lock Pins 2 into Right Side BR using guide holes. 2. Align and insert Cam Lock Pins on Right Side BR into pre-drilled holes of Bottom Shelf E and two Top Shelfs D . 3. Insert nine Cam Locks 2 into pre-drilled holes of Bottom Shelf E and two Top Shelfs D . 4. Using a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY STEP 5 C2 C2 BL D BR vant t/A Fron nt / Ava t n o Fr nt / Ava rF ont 1. Align Dowels on Top Dividers C2 with pre-drilled holes in centre of Top Shelf D and insert firmly.
ASSEMBLY STEP 6 A BL C2 C2 2 BR nt / Ava rF ont t Avan / t n Fro vant t/A Fron 1. Insert twelve Cam Lock Pins 2 into Top A using guide holes. 2. Align and insert Cam Lock Pins on Top A into pre-drilled holes of Sides BL , BR and two Top Dividers C2 . 3. Insert Cam Locks 2 into pre-drilled holes of Sides B and two Top Dividers C2 . 4. Using a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY STEP 7 NOTE: The screwdriver is not included in the hardware pack. B FR F1 FL ant t / Av Fron 4 1. Attach Back Panels FL , FR , F1 to back of cabinet using Phillips Screws Round Head 4 into pre-drilled guide holes. 2. Use Phillips screwdriver to tighten screws.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 8 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line or by email. We reserve the right to repair or replace the defective product, at its discretion.
