Installation & Assembly

Step

Attach

front

top rail

(part

top

vertical panel

(part L)

using wood dowel

(part #3),

long screw

(part #15) and phillips head screwdriver. With front top rail (part E) flat on ground, attach front

middle rail (part G) and back top rail (part F) to top vertical panel (part L) using wood dowels

(part #3), long screws (part #15) and phillips head screwdriver.

NOTE: Please ensure screws are aligned with the pre-drilled holes in top vertical panel (part L)

before tightening.

#15

Step 4. Attach assembled unit (parts E, F, G & L) to right panel (part C) using wood dowels (part #3) and

cam locks (part #1 ). Attach back top panel (part D) to right panel (part C) using wood dowel (part #3)

and cam locks (part #1 ).

NOTE: Cam locks must rotate a full 180

. See pictured insert.

point arrow o

lock to ward

adjace

1 /2 turn clockwise to fasten

#3 x4