Installation & Assembly

Step 13. Attach top panel (part A) to assembled unit (parts B, C, D, E & L) using wood dowels (part #3) and

cam locks (part #1 ).

NOTE: Cam locks must rotate a full 180

. See pictured insert.

1/2 turn clockwise to fasten

#1 &;>xs

#3 x2

Step 14. Attach door panels (parts V & W) by placing bottom pin hinge (pre-installed in door) in the

pre-drilled hole of bottom panel (part I). Then depress

the

top spring-loaded pin hinge so it can be

placed in the pre-drilled hole of front middle rail (part G). Place shelf holders (part #7) into desired

position.

NOTE: Be sure top and bottom pin hinges are fully extended to secure doors in place.

in Hinge

......... ____ _

#7 x12