Assembly Instructions

A
1
D
4
B
4
E
12
C 4
F
12
H
12
Table top
Table leg
Center plate
G
12
Lock washer
Flat washer
Nut
Nut cap
Parts list Parts picture Description
Q'ty
Parts list Parts picture
Description
Q'ty
ASSEMBLY INSTRUCTIONS
Bolt
2. Loosely attach each of the 4 center plates(B) to the legs. Note that the recessed end of each plate goes on the
leg last at each corner. Secure using flat washers, lock washers, nuts(G) and nut caps(H)(show as the figure).
3. Tighten all the bolts and nuts completely. DO NOT over tighten the nuts and bolts.
4. Turn the table onto its legs and use the adjuster feet to level the tables.
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
ATTENTION:
11
33
22
Warning : please do not use acid or alkaline washing liquid to clean the product.
Assembly steps:
1. Loosely attach the 4 legs (C) to the table top with bolts(D),flat washers(E),lock washers(F),nuts(G) and nut
caps(H).Do not over-tighten.
C
E
F
H
G
D
A
B
(M8*30)