Owner Manual

Table Of Contents

12/14

ASSEMBLY

STEP 5

1. Attach Bottom Support Leg H into pre-drilled holes of Bottom Panel G using

4 Phillips Screws 7 .

2. Use Phillips screwdriver to tighten Screws. Do not over-tighten.

NOTE: The screwdriver is not

included in the hardware pack.

STEP 6

1. Attach Seat A to Back D using 6 Phillips Screws 6

( using guide holes on bar of Back ).

2. Use phillips screwdriver to tighten Screws. Do not over-tighten.