Owner Manual

Table Of Contents

11/14

ASSEMBLY

STEP 4

1. Insert 5 Dowels 3 into each Side BL , BR at specified location.

2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of

Dowels should be exposed.

3. Align pre-drilled holes on side bars of Front C & Back D and Backrest F with Dowel 3

on Sides BL , BR .

4. Attach Front C & Back D to Sides BL , BR using 12 Allen Key Screws 1 through pre-

drilled holes ( 6 Screws / each Side BL , BR ).

5. Attach Backrest F to Sides BL , BR using 4 Allen Key Bolts 8 through pre- drilled holes

( 2 Screws / each Side BL , BR ).

6. Use Allen Key 4 to tighten Screws. Do not over-tighten.