Owner Manual

ASSEMBLY
STEP 4
1. Insert 5 Dowels 3 into each Side B at specified location.
2. Align pre-drilled holes on side bars of Front C & Back D and Backrest F with Dowel 3
on Sides B .
3. Attach Front C & Back D to Sides B using 12 Allen Key Screws 1 through pre-
drilled holes ( 6 Screws / each Side B ).
3. Attach Backrest F to Sides B using 4 Allen Key Bolts 8 through pre- drilled holes
( 2 Screws / each Side B ).
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
10/13