Owner Manual (Twin)

14
Step
6
SLAT WARNING
Correct: Slat curve should
be facing upwards.
Incorrect: Slat curve
facing downwards.
O
O
X
E
X
Y
O
O
F
O
E
X
E
F
Y
X
6.1
6.2
6.3
6.1 Insert O into X;
6.2 Press X into E, repeat the same procedure
for the opposite side.
6.3 Insert ends of both slat O into Y, then
press Y into F as illustrated.
Repeat the same procedures going backwards
for every row of slats.