ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: fast & easy assembly. A Naming ! the store immediately. 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure 1. Don't attempt to repair or modify parts that are broken or defective . Please contact 2. This product is for home use only and not intended for commercial establishment.
ASSEMBLY INSTRUCTION ASSEMBLY Do not fully tighten all bolts until assembly is complete.This will help all parts to assemble properly. STEP 1:Align and attach the leg (C) to the headboard (A) . As shown on the drawing. STEP 2 :Align the side rail 1 (D} and side rail attach them together using the bolt (2), washer (5), tighten with Allen wrench. As shown on the drawing.
ASSEMBLY INSTRUCTION STEP 3:Align the assembled side rail ,and attach them to headboard {A) and foot board {B)using bolt washer (6), tighten with wrench As shown on the drawing. STEP 4:Align the support leg (H) and slat 1 (G}, then attach them together,bolt washer tighten with Allen wrench. As shown on the drawing.
ASSEMBLY INSTRUCTION using bolt (2) and washer tighten with Allen wrench. As STEP 5:Attach the assembled slats with support leg to side rails, shown on the drawing. STEP 6:Completed.
