Platform bed with storage drawers Twin Grey Linen Weight Limit: Bed: 250 Lb / 113 Kg Drawer: 40 Lb / 18 Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information Read Before Beginning Assembly warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
Parts For Bed A B C1 D D1 All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Side Panel Side Panel Side Panel X1 X1 X1 X1 X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts For Drawers L C N M All in 1 big box! There are inner box(es) that include components required to complete this assembly. Front Panel Drawer Bottom Panel X1 X1 S Drawer Back Panel Drawer Side Panel X1 X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 2 4 3 Hardware Pack 5 3/16 X 3/8" X2 1/4" X 3/4" 1/4" X 3/4" X1 X6 1/4" X 1 3/16" X1 1/4" X 1 9/16" X 28 6 7 9 8 1/4'' X1 3/16 X 7/8" X6 3/16 X 1" X 14 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Attach G X 2 to D and D1 with ❹.
Step 2 Attach I to D and D1 with ❹. Don't completely tighten the bolts until STEP 8 is complete.
Step 3 Attach A to G X 2 with ❹.
Step 4 You can assemble the drawer on either side by following the illustration below. D1 Attach E and E1 to D and D1 with ❹.
Step 5 Attach H to B with ❶ and ❸.
Step 6 Attach B to E and E1 with ❹.
Step 7 C1 Attach C1 to E1 with ❹.
Step 8 4 8.1 Attach F to A with ❶, Attach F1 to B A 1 with ❶. Please don't reverse the location for A & B, or you will not be able to make the assembly. F F F1 8.2 Attach F and F1 to I with ❹. Then properly tighten all the bolts. I 8.2 8.
Step 9 O X X 9.1 Insert O into X, 9.2 Press X into E/E1/G, repeat the same procedure for the opposite side of the bed with a new O and X. 9.3 Insert ends of both O into Y, then press Y into F or F1 as illustrated. Repeat the same procedures going backwards for every row of slats. Y O O O G 9.1 9.2 Y F F 9.3 SLAT WARNING X G Correct: Slat curve should be facing upwards. E1 O F1 1st choice for Drawer location E Incorrect: Slat curve facing downwards.
Step 10 Attach M to S and N with ❻. Don't completely tighten the bolts until STEP 12 is complete. For better performance, please orient the plastic sheet S/M/N towards inside of the drawer. S Make sure that these holes are all located on the top side before assembling.
6 7 5 Step 11 11.1 Attach Q to L with ❺. 11.2 Attach Q X 4 and L to S and N with ❼. Q Q L L L M S 11.1 11.3 Attach L to M with ❻. 11.3 11.
Step 12 S Attach sub-assembly L/S/N/M from previous step to C with ❼, then properly tighten all the bolts.
Step 13 Attach ❷ and C ❽ to C.
Step 14 Pin Slot Slot Align Drawers with the bed frame and push them into the bed. Lock drawers by slightly lifting drawer and inserting the Pin into the Slot.
Helpful Hints Weight Limit: Bed: 250 Lb / 113 Kg Drawer: 40 Lb / 18 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old.
NO LO REGRESE A LA TIENDA ! Cama plataforma con Almacenamiento Individual Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Lino gris ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Partes Instrucciones Paso 1 Una G X 2 con D y D1 con los ❹. Paso 2 Todo se incluye en 1 caja grande! Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para completar este ensamblaje. Antes de tirar este paquete, por favor utilice la Casilla de Verificació n para identificar sus partes y garantizar de que cuenta con todas las piezas necesarias para el ensamblaje.
Límites de peso: Bed: 250 Lb / 113 Kg Drawer: 40 Lb / 18 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
NE RETOURNEZ PAS AU MAGASIN ! Lit plateforme avec rangement Simple Si une pièce est manquante ou endommagée, nous vous expédierons avec plaisir vos pièces de remplacement gratuitement. Lin gris CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE. Avant de commencer l'assemblage Informations sur la garantie garantit que ce produit est exempt de tout vice de matériaux et de fabrication et s'engage àremé dier àun tel déf aut.
Pièces Tout dans 1 grosse boîte! Il y a des boîtes intérieures qui contiennent les composants pour completer l'assemblage. Avant de jeter l'emballage, s'il vous plaît utiliser les cases à cocher pour identifier les pièces et assurez-vous que vous avez toutes les pièces nécessaires pour l'assemblage.
Limite de Poids: Bed: 250 Lb / 113 Kg Drawer: 40 Lb / 18 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
