Assembly Instructions

Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into
the pre-drilled holes in Tops (A) and Sub Top (B), Front Panels (H), Side Panel (K),
Middle Panel (L), and Base (M). (See Figure 1)
STEP 2
Place Top (A)
upside down on a soft cloth.
Attach Side Panels (D) and
Front Panel (C) to Top (A) with Cam Locks.
Attach Sub Top (B) to top unit with Head Cap Bolts and Flat Washers.
B
H
H
A
K
L
B
C
A
D
D
M
Figure 1
Cam Lock Screw
Head Cap Bolt
Flat Washer
2/6