Upholstered Bed with Storage King Black Faux Leather Weight Limit: Bed: 500 Lb / 227 Kg Drawer: 40 Lb / 18 Kg Thank you for purchasing! DO NOT RETURN TO THE STORE ! Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information We warrant this product to be free from defects in material and workmanship agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
Parts A1 A This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Headboard Back Panel X1 X1 L Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
B C S N This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Footboard Drawer Side Panel Drawer Side Panel Front Panel X1 X4 X4 X4 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 2 1/4" X 3/4" 1/4'' 1/4" X 3/4" X4 X4 X 26 Hardware Pack 5 4 3 1/4" X 1 9/16" X8 4mm 6 8 7 X1 9 3/16 X 3/8" X8 1/4" X 1/2" 3/16 X 7/8" X 24 X8 3/16 X 1" X 56 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Stick A1 to the back of A with Velcro as illustrated.
Step 2 Attach H X 4 to A and B with ❾.
Step 3 Attach J to E with ❶. Repeat the same procedure for remaining part J and E.
Step 4 Attach K X 2 to F with ❶. Repeat the same procedure for remaining part K X 2 and F.
Step 5 A Attach F to A and B with ❶ Attach E to A and B with ❹.
Step 6 Attach G to J x 2 with ❶.
Step 7 X X P1 P1 7.1 Insert P1 into X; 7.2 Press X into E, repeat the same procedure for the opposite side of the bed. with a new P1 and X. Follow the same procedures going backwards for every row of slats. E 7.1 7.2 SLAT WARNING X E Correct: Slat curve should be facing upwards. E Incorrect: Slat curve facing downwards.
Step 8 P1 P1 Y Y P1 P1 F F 8.1 8.2 8.1 Insert Y x 2 onto the ends of P1 assembled in previous step; 8.2 Take a new P1 and insert both ends into the other free end of Y x 2, then press Y x 2 SIMULTANEOUSLY into F x 2 as illustrated. Follow the same procedure going backwards for every row of slats. SLAT WARNING Correct: Slat curve should be facing upwards. Y F Incorrect: Slat curve facing downwards.
Step 9 Attach M to S and N with ❼. Don't completely tighten the bolts until STEP 12 is complete. For better performance, please orient the plastic sheet towards inside of the drawer.
Step 10 Attach Q to L with ❻.
Step 11 11.1 Attach Q X 4 and L to S and N with ❽. 7 8 11.2 Attach L to M with ❼. L Q L M S 11.2 11.
Step 12 S Attach sub-assembly L/S/N/M from previous step to C with ❽, then properly tighten all the bolts.
Step 13 Attach ❷ and ❸ to C.
Step 14 Pin Slot Slot Align Drawers with the bed frame and push them into the bed. Lock drawers by slightly lifting drawer and inserting the Pin into the Slot.
Weight Limit: Bed: 500 Lb / 227 Kg Drawer: 40 Lb / 18 Kg Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: To unlock the drawers: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old.
NO LO REGRESE A LA TIENDA ! Diván con almacenamiento King Imitación de cuero negro Fecha de compra Número de lote Gracias por su compra! Contáctenos! Para solicitar ayuda con el ensamblaje, identificación de partes, información del producto o simplemente ordenar otras partes, dirijase ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA. Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia.
Partes Este artículo se embala en 2 cajas! Las piezas nombradas abajo están en la Caja A. Si la Caja B no se incluye por favor póngase en contacto con su distribuidor. Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para completar este ensamblaje. Antes de tirar este paquete, por favor utilice la Casilla de Verificación para identificar sus partes y garantizar de que cuenta con todas las piezas necesarias para el ensamblaje.
Límites de peso: Bed: 500 Lb / 227 Kg Drawer: 40 Lb / 18 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
NE RETOURNEZ PAS AU MAGASIN ! Lit de jour avec rangement Très grand lit deux places Faux cuir noir Date d'achat Numero de lot CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE. Avant de commencer l'assemblage Merci d'avoir acheté un produit! ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais.
Pièces Cet article est emballé dans 2 boîtes! Les pièces listées suivant sont dans la Boîte A. Si la Boîte B est manquant s'il vous plaît contactez votre détaillant. Il y a des boîtes intérieures qui contiennent les composants pour completer l'assemblage. A A1 L M B N S C E F G H J Avant de jeter l'emballage, s'il vous plaît utiliser les cases à cocher pour identifier les pièces et assurez-vous que vous avez toutes les pièces nécessaires pour l'assemblage.
Limite de Poids: Bed: 500 Lb / 227 Kg Drawer: 40 Lb / 18 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
