Owner Manual

Step 2
Step 3
Then,turn the Chair Base(C) upside down on a clean,non-marring surface.
Extend the Footrest to open.
Carefully take out inner box stowed as shown above.
Open it, and you will find Wings (B1) & (B2).
Stow the Footrest to original position.
Keep the Chair Base in the same position,first,install the Front Leg(D) at the
bottom of the Chair by placing one Gasket(1) on the threaded stem.Then
insert threaded stem into the threaded mounting position at the corner of the
chair.
Tighten by turning the leg clockwise,DO NOT OVER TIGHT.
Repeat the same step to install the remaining three Legs(D) &(E) .
Take care of the shape of the Legs and ensure they are in the correct
positions.
Note:The use of the Gaskets are OPTIONAL and are especially useful
to help alleviate slight wobbleness.Some legs may need more than on
gasket whilst some legs may not need any.
C
Inner
Box
Footrest
B2
B1
E
D
1
Legs:Bevelled plane inside facing
Page 5 OF 10