Owner Manual

WOOD/BUTCHER BLOCK CARE
For best results, clean top surfaces with damp cloth and mild detergent. Towel it off to remove
excess moisture. Do not use abrasives or powder cleansers. Do not allow moisture to stand on the
surface for prolonged periods of time.
FAUX WOOD/MARBLE CARE
We recommend dusting frequently with a clean, soft, dry, lint-free cloth. Wipe spills immediately
with a clean cloth. We do not recommend the use of aerosol-powered cleaners, polishes that
contain silicone, waxes, abrasives, or are oil-based. To avoid damaging the surface of the furniture,
always use a cutting board when cutting food or other items on the surface. Do not place hot
items directly on the surface, always use pads or trivets to prevent damage.
STAINLESS STEEL CARE
Stainless Steel should always arrive unblemished. To clean, use warm water or over-the-counter
stainless steel cleaner with a soft cloth. Spray your top lightly and rub in the direction of the
grain of the metal finish until clean. Wipe dry. We do not recommend the use of abrasives, oven
cleaners or products containing chloride. To avoid damaging the surface of the furniture, always
use a cutting board when cutting food or other items on the stainless steel surface. We also
recommend the use of trivets or insulated heat pads under hot pans to avoid scorching.
RESIN WICKER FURNITURE CARE
Regular cleaning is recommended for wicker, as it generally cannot endure harsh or abrasive
treatments. This also minimizes mildew buildup. To remove dirt and debris, vacuum with a dust-
brush attachment or use a dry paintbrush. Clean with a mild soap solution, scrub with a sponge,
rinse with cold water and dry completely. Avoid sitting on the wicker when still damp, which
can cause wicker to sag. If wicker furniture is caught during a sudden rain storm, please make
sure to drain any water that may have accumulated inside the frame and dry completely. Please
always cover the furniture when not in use, and store properly during inclement weather and
the winter/rainy seasons.
METAL FURNITURE CARE
Because most metals, except aluminum, are subject to rust, metal furniture is usually finished
with layers of clear varnish, paint, or a durable powder coating. To clean, use a mild soap solution,
scrub, rinse and dry. On outdoor furniture, make sure to drain any water that may accumulate
inside the frames after rinsing. After cleaning, apply a coat of quality liquid or paste wax with a
lint-free cloth. Use a silicone spray to lubricate swivels and glides on chairs. If metal outdoor
furniture is caught during a sudden rain storm, please make sure to drain any water that may have
accumulated inside the frame and dry completely. Please always cover the furniture when not
in use, and store properly during inclement weather and the winter/rainy seasons. On indoor
furniture, do not use abrasives as this may lead to the accidental
removal of antique finishes and also to staining or damage to surrounding areas of fabric
(IE Bed Buttons).
FABRIC MATERIALS CARE
Prevent stains by removing crumbs, dust, dirt, and debris. To remove dirt and debris, vacuum with
a dust-brush attachment. Clean spills immediately! For Linen – If the linen item is removable,
place the item in a clean sink or tub with cool water and a mild detergent. Gently agitate the linen
items, then remove from the soapy water. Rinse with cool water and hang dry. If not removable,
then spot clean by dabbing with solution of cool water and a mild detergent on a soft non-
abrasive cloth. For Microfiber - If the microfiber item is removable, machine wash in cold water
with mild detergent. No fabric softeners as they will clog the open spaces in the microfiber,
making the fabric useless. Avoid washing with cotton items because the microfiber will grab on
to the lint. If not removable, then spray the area lightly with a water-based solution; using a soft
cloth and a blotting motion to remove the stain. Fully air dry.