ASSEMBLY INSTRUCTION FULL CANOPY KIT UPPER POSTS BH UPPER POSTS LONG CANOPY TUBES FORBORE FORBORE pecs PCs apes Bb SHORT CANOPY TUBES H MILLED CANOPY TUBES BOLT 1/4", 38MM PCs PCs apes [e] BOLT BOLT ALLEN WRENCH = 1/4" 51MM [H] [1] 4X4MM PCs PCs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly,place the contents.
BH Take off PCs finials. Assemble short canopy tubes (D) to upper posts (A) (B) with PCs bolt (G) then fastened using Allen wrench (1).
Assemble the short canopy tubes (E) to long canopy tubes (C) with PCs bolt (F) then fastened using Allen wrench (I). F Gms PCs Assemble the long canopy tubes (C} to 4 upper posts (A) (B) with PCs bolt (G) then fastened using Allen wrench (1).
Assemble the finial to the upper posts (A} (B). 9) Assemble PCs upper posts (A) to headboard with PCs bolt {(H) ,assemble PCs upper posts (B) to foot board with PCs bolt (H). This screwdriver is not provided Cleaning&Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
