Assembly Instructions

This page lists all the contents included in the box.

Please take the time to identify the hardware as well

as the individual components to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

PAGE 1
This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
Use the Bolt (N) with the Locker Washer (O) and Flat Washer (P) to tighten the Headboard Panel (A) with the Headboard Post (B) by 4mm Allen Wrench (T). Directly screw the Finial (H) onto the Headboard Post (B). Use the Bolts (N) with the Locker Washer (O) and Flat Washer(P) to tighten the Footboard Panel (C) with the Footboard Post (D) by 4mm Allen Wrench (T). Directly screw the Finial (H) onto the Footboard Post (D).
PAGE 3
Use Bolt(J) with Lock Washer(K), Flat Washer(L), and Plastic Washer(M) to connect Side Rail(E) onto Headboard(A) and Footboard Panel(C), by 5mm Allen Wrench(U). Use Sunk Bolt(Q) to tighten the Support Leg (G) onto Slat(F), by 4mm Allen Wrench(T). Make sure the Slat(F) are properly tenoned onto Side Rail (E). Remark: The mounting plate(s) are only to be used if you have your own standard side rail frame(s).