Owner Manual

Assembly Instructions

ASSEMBLY RATING

Tools Required For Assembly:



      

      





EASY 

Allen Wrench

(Included) �

�

2 PERSONS RECOMMENDED

Page 1 of 5

PAGE 1
Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
PAGE 2
PAGE 3
PAGE 4
1. Carefully place the table top (#1) face down onto a protected surface. 2. Prepare 6 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 3. Align the top of the legs (#2) to corner holes on the table top (#1). Then insert 2 bolt assemblies into each corner and secure using the Allen wrench (#D). 2.
PAGE 5
1. Prepare 3 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2. Align the fourth leg (#2) to the last corner. Insert a bolt assembly to the top corner and 2 into the bottom corner. Secure using the Allen wrench (#D).