Assembly & Installation Instructions

House Grounding Wire

Green Grounding Screw (E)

Fixture Grounding Wire

Wire Nut (C)

Back Plate

Ball Nut (G)

Shade

Clip

Candle Cover

Fixture

Nipple

Tube

Finial

Socket

Mounting Screw (B)

Mounting Plate (A)

Outlet Box

Fixture Wire

Lock Nut (F)

Headless Screw (D)

ASSEMB

LY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Green Grounding

Screw (E)

Headless

screw (D)

Mounting Screw (B)

Wire Nut (C)

Installation Steps

Lock Nut (F)

Mounting plate (A)

Ball Nut (G)

Bulb Type B

Max. 60W

(not included)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Thread two headless screws through the mounting plate, then secure them with four lock nuts (two on each side of the mounting plate). Adjust the length of the headless screws if necessary. Note: Make sure that the headless screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the mounting plate to the outlet box by using two mounting screws. 3. Place the candle cover onto the socket to cover the socket completly. 4.