Installation & Assembly

Warning : DO NOT use acid or alkaline
washing liquid to clean the product.
K
1.Place the base on a flat, solid surface.
Loosely attach the seat to the base.
Please using screws(A), flat washers(B),
lock washers(C), nuts(D) and nut caps(E).
2.Tighten all the bolts and nuts completely.
Use the adjuster feet to level the legs.
3. Remove all protective packaging.
4.Put Cushion(K) on the unit(as shown in
the picture).
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
I
J
H: This part have been assembled by
factory already.
C
B
A
D
E
B