Assembly Instructions

NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
A
1 PC
Head Board
1 PC
CSK SCREW M4 x 32MM
Hardware ListNo
Qty
Headboard Leg (L/R)
Side Rail
Foot Board
2 PCS
D
E
Part List
No
Qty.
C
B
6 PCS
2 PCS
G
3 PCS
Bottom Rail
ASSEMBLY INSTRUCTIONS
F
I
1 PC
K
Bottom Rail Support
3 PCS
JCBC BOLT M6 x 30MM
6 PCS
H
FLAT WASHER M6 X 13mm blk
1/4 X M6 SPRING WASHER
6 PCS
6 PCS
J
ALLEN WRENCH M4
Attach Side Rail ( D ) to Head Board ( A ) closely and push down to fit.
STEP 2 :STEP 1 :
C
D
D
D
A
B
D
D
A
Repeat STEP 1 to fitting Footboard (B). Secure the Side Rail to the
Headboard and Footboard using hammer and protect with cloth. Repeat
the procedure until the Headboard and Footboard not shaking easily
( NOTE : THE CLOTH MUST THICK ENOUGH TO PROTECT THE SIDE RAIL FROM SPLITTING ).
STEP 3 :
STEP 4 :
Fix the Bottom Rail Support (F) to Bottom Rail (E) as show , and fix the Bottom
Rail to Side Rail (D) by using CSK screw (G).
(NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR
THE BED TO OBTAIN PERFECT STABILITY)
Attach L&R Headboard Legs (C) to Headboard (A) as shown using
JCBC bolt (H) with Spring Washer (J),Flat Washer (I) securing with
Allen Wrench (K).
K
H
J
I
A
C
LEFT
RIGHT
G
Fix Slat (E) flush against
Side Rail (D) using screw
driver & CSK screw (G).
E
F
adjustable glider