Align headboard leg support (#4) to the headboard legs (#3), then secure by using bolts (#C). Align and attach headboard (#1) to headboard legs (#3), then secure by using bolts (#A) with washer (#D).
Align and attach side rails (#5) to side rails (#6), then secure by using bolts (#A) with washers (#D). Align side rails (#5,6) to the holes of the headboard and footboard, then secure by using bolts (#A) with washers (#D).
Align support legs (#9) to the holes of the slats (#7,8), then secure by using bolts (#B) with washers (#D). Align slats (#7,8) to the holes of the side rails (#5,6), then secure by using bolts (#A) with washers (#D).
Align washers (#E) to the corner top holes of the headboard (#1) and footboard (#2), then secure posts (#10,11) onto the holes of the headboard (#1) and footboard (#2). Align and attach canopy tubes (#13,14) together, then secure by using bolts (#A).
Align canopy tubes (#12,13,14) to the holes of the posts (#10,11), then secure by using finials (#15).
STEPS 14-17 IS HOW TO DETACH CANOPY FROM BED. Remove finials (#15) from the bed.
Remove the posts (#10,11) from the headboard (#1) and footboard (#2). Reattach the finials (#15) to the headboard (#1) and footboard (#2).
ASSEMBLY COMPLETED