Assembly Instructions

BEFORE YOU START:

1. Check the parts against the parts list to make

sure all items are present.

2. Assemble your furniture on a soft, flat surface to

avoid scratching the finish.

3. CAUTION: Do not over tighten screws, nuts or

bolts during assembly.

4. Your furniture may require occasional tightening.

1. Lay the mirror face down on a clean soft surface. Attach

Mirror support to the back of Mirror. Make sure top two

pre-drilled holes on the Mirror support rail align with insert

nuts on the back of Mirror as Figure 1. Loosely tighten

Mirror support with Flat washer (C), Lock Washer (B), Bolt

(A) and Wrench (D).

2. Place the Mirror with two supports on the top of Dresser.

Make sure 2 pre-drilled holes on the bottom of Mirror

support rail align with insert nuts at the back of Dresser as

Figure 2. Secure Mirror support rail with Flat Washer (C),

Lock Washer (B) and Bolt (A). Tighten all bolts with

Wrench (D).

INSTRUCTIONS:

No.

Q'ty

Hardware List

Bolt Ø1/4"x1-1/4"

Allen Wrench (supplied, part # D)

TOOLS REQUIRED:

Lock Washer Ø1/4"

Flat Washer Ø1/4"

Allen Wrench 4mm

Figure 1

Figure 2

Support rail

ASSEMBLY INSTR

TIONS