Owner Manual

13/20
ASSEMBLY
STEP 8
1. Insert 4 Dowels 3 into guide holes on each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side BL , BR into pre-drilled holes.
4. Align and insert Cam Lock Pins on Sides BL , BR into guide holes on Bottom Shelf F .
5. Place 6 Cam Locks 2 into guide holes on Bottom Shelf F .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
7. Attach Middle Frame E to Sides BL , BR using 4 Allen Key Screws 1 through guide
holes ( 2 Screws / each Side ).
8. Use Allen Key 4 to tighten screws. Do not over-tighten.
BR
BL
Fron
t / Avan
t
Front / Avant
Fro
nt / Avant
Fro
n
t /
Avant
3
2
1
4
3