Owner Manual

11/20
ASSEMBLY
STEP 5
STEP 6
1. Insert 2 Dowels 3 into guide holes on Large Divider C .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach 2 Cam Lock Pins 2 to Middle Frame E into pre-drilled holes.
4. Align and insert Cam Lock Pins on Middle Frame E into guide holes on
Large Divider C .
5. Place 2 Cam Locks 2 into guide holes on Large Divider C .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
1. Attach Small Divider D to Middle Frame E using 2 Allen Key Screws 1 .
2. Use Allen Key 4 to tighten screws. Do not over-tighten.
Front
/ Avan
t
Fro
nt / Avan
t
Fron
t / Avan
t
Front / Avant
Fro
n
t / Avant
Front
/ Avan
t
Fro
nt / Avant
1
4
Front / Avant
3
2