Installation & Assembly

12/18
ASSEMBLY
STEP 9
1. Insert 2 Dowels 3 into top corners of each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .
3. Align pre-drilled holes bottom corners of Top A with Dowels 3 in Sides B .
exposed
4. Attach Top A to Sides B and Small Divider D using 9 Allen Key Screws 1 .
5. Use Allen Key 4 to tighten screws. Do not over-tighten.
1. Attach Back Panels I to back of cabinet using Phillips Screws Round Head 5 into
pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
STEP 10
NOTE: The screwdriver is not
included in the hardware pack.