Installation & Assembly

11/18
ASSEMBLY
STEP 8
1. Insert 4 Dowels 3 into pre-drilled holes on each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .exposed
3. Attach 3 Cam Lock Pins 2 to each Side B into guide holes.
4. Align and insert Cam Lock Pins on Sides B into pre-drilled holes on Bottom Shelf F .
5. Place 6 Cam Locks 2 into pre-drilled holes on Bottom Shelf F
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
7. Attach Middle Frame E to Sides B using 4 Allen Key Screws 1 through pre-
drilled holes ( 2 Screws / each Side ).
8. Use Allen Key 4 to tighten screws. Do not over-tighten.