Assembling & Installation Instructions

ManualsBrandsThree Posts ManualsLightingBevin 22'' H

ASSEMBLING

& INSTRUCTIONS

OUTDOOR POST

MOUNT LIGHT FIXTURE

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

ASSEMBLING THE FIXTURE ( Fig. 1) .

1. Carefully unpack new fixture and lay all the parts on a

clear surface.Take care not to lose any small parts

necessary for installation.

2. NOTE: Discharge of the loop(A), take out cover(B),(C)

and glass shade(D).

3. Install the light bulbs(no included) in accordance with

the fixture ’ s specifications. DO

DO NOT

NOT

NOT EXCEED

EXCEED

EXCEED THE

THE

MAXIMUM

WATTAGE

RATING!

4. Attach the glass shade(D) to the lamp body(E) , aligning

the top center hole with the pipe screw, attach the

cover(C) and (B) to the glass shade(D), then lock it

securely with the loop(A).

5. Attach the assembly lamp body onto the post(E, no

included) and lock it securely with the screw (F).

Wiring (Fig.2)

1. Connect the electrical wires as follows. Connect the

b lack wire from the fixture to the black house (hot)

w ire. Connect the white wire from the fixture to the

white (neutral) house wire. Make sure all wire nuts are

secured. You may wrap the connections with electrical

tape. If your outlet box has a ground wire (green or

bare copper) connect fixture

’

s ground wire to it.

Otherwise attach the bare copper fixture wire to the

green ground screw on the circular str a p.

2. Tuck the wire connections neatly into the junction

box.

Your

installation

installation is

is now

now

now complete.

complete.

complete. Return

Return

Return power

power

power to

to the

the

junction

junction box

box

box and

and

and test

test

test the

the

the fixture.

fixture.

Fig. 1

Fixture

Ground Wire

Fig. 2

White or

HOUSE

Black

WIRES

(Hot)

Smooth

FIXTURE

WIRES

Black or

Ribbed

WIRES

FIXTURE

Bare Copper(Ground)

FIXTURE

WIRES

Copper

(Ground)

HOUSE

(Neutral)

WIRES

White

Bare

Green or

WIRES

HOUSE

Listed

&INSTALLATION