FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US PLEASE ENSURE TO HAVE THE MODEL # FROM THE PACKAGING OR INSTRUCTION BOOKLET TO RETURN THE PRODUCT: PLEASE CONTACT THE RETAILER WHERE THE ITEM WAS PURCHASED FROM 2/12
( IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PER-ASSEMBLY INFORMATION PART DESCRIPTION SIDE BACK PANEL QTY 1 SET DRAWER FRONT Qry 2 1< DRAWER SIDE QTY 2 PAIRS DRAWER BACK Qry 2 DRAWER BOTTOM Qr NEED HELP? For help with assembly or if you are missing a part, Please call customer service 4/12
PER-ASSEMBLY INFORMATION HARDWARE DESCRIPTION ALLEN KEY BOLTS ALLEN KEY SCREW CAM LOCK PIN M6 X 30mm M6 X 30mm CAM LOCK Qry 12 Drys QTY 8 SETS PHILLIPS SCREW HANDLE | | ROUND HEAD ALLEN KEY | M4 X 15mm QTY 2 SETS ! airy ! QTy 18 —a(C—B =—ad—D Required Flathead screwdriver Phillips screwdriver Not Included Please call customer service e [NEED HELP? For help with assembly or if you are missing a part, 5/12
ASSEMBLY STEP-1 1. Attach 4 Cam Lock per-drilled holes at back of Drawer Front(F). 2. Align Cam Lock Pins with per-drilled holes and attach Drawer Sides@. 3. Insert 2 Cam Locks (3)into per-drilled holes on each Drawer Side (G). 4. Use Flathead screwdriver secure Cam Locks. STEP-2 1. Slide Drawer Bottom (Firmly into slots on Drawer Sides (G)and Drawer Front(F).
A VTR STEP-3 1. Align Drawer Back@with Drawer Bottom @and press firmly into slot . 2. Attach Drawer Back using 2 Allen Key Screws @through per-drilled holes on each Side G). 3. Use Allen Key@to tighten screws. Do not over-tighten.
ASSEMBLY STEP-5 1. Attach Bottom Middle Frame (C)to Sides (D) using 8 Allen Key Bolts(T)( 4 Bolts / each Side ). 2. Use Allen Key@ to tighten bolts. Do not over-tighten.
ASSEMBLY STEP-6 I 1. Attach Sides (D) using 4 Allen Key Bolts(1)( 2 Bolts / each Side ). 3. Use Allen Key@ to tighten screws and bolts. Do not over-tighten.
ASSEMBLY 1. Attach the Back Panel@to back frame of cabinet using Phillips Screws Round Head @through per-drilled holes. 2. Use Phillips screwdriver to tighten screws. STEP-8 1. Insert assembled drawers into glides on assembled table.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) We reserve the right to repair or replace the defective product, at its discretion. This product is guaranteed for 12 months if used for normal purposes.
