Assembly Instructions

Step 8
Step 9
Step 10
Make sure all parts are connected and securely locked into position.
Your Chair is ready for use.
Disassembly Note:Open the flap on the Chair Backrest(A),use a
screwdriver(Don't use fingers) pressing outward on the metal ear on the
preattached Metal Bracket on one side of the Chair Base(B),with assistance of
you adult partner to keep the Chair Base(B) in place, pull out the Chair
Backrest(A) upward at the same time,repeat the same step for another
side.Then the Chair Backrest(A) can be taken out.
Smooth down the fabric flap on the Chair Backrest.
Run your hands down both sides of the flap, from top to bottom, allowing the
velcro tape to adhere to the flap under the seat of the chair.
Your Push Back Chair is ready for use.
D
C
Velcro
F
B
A
E
Velcro
A
B
F
Velcro
D
C
Page 7 OF 9