Assembly Instructions
Step 4
Step 5
Turn the Chair Base with Footrest(B) upside down on a clean, non-marring
surface.
Take out 2 non-woven bags with Wings inside from the bottom of the
mechanism. Then take out the Wings from non-woven bags.
Keep the Chair Base with Footrest(B) in the same position. First, install the
Front Leg(E) at the bottom of the Chair by placing one Gasket① on the
threaded stem.
Then insert threaded stem into the threaded mounting postion at the corner of
the Chair.
Tighten by turning the Leg clockwis, DO NOT OVER TIGHTEN.
Repeat the same step to install the remaining three Legs(E) .
Take care of the shape of the Legs and ensure they are in the correct postions.
Note: The use of Gaskets are OPTIONAL and are especially useful to help
alleviate slight wobbleness. Some Legs may need more than one gasket
whilst some legs may not need any.
B
Legs:Bevelledplane
insidefacing
F
B
A
E
Velcro
Velcro
A
E
B
F
E
①
①
F
Page 5 OF 9