Caution : You must read this before you proceed Push Back Chair Label A Picture Description QTY Chair Backrest 1 Page 1 OF 9
B Chair Base with Footrest 1 C Left Wing（Labelled C） 1 D Right Wing （Labelled D) 1 E Front Leg 2 F Hind Leg 2 Description QTY Gasket 7 Label ① Picture Page 2 OF 9
Before Beginning Assembly: Parts Introduction Chair Backrest(A) Left Wing(D) Right Wing(C) Chair Base with Footrest(B) Hind Leg(F) FRONT FACING Front Leg(E) This Push Back Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Reclining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 1 Velcro A A B Velcro Take out the Chair Backrest(A) from Chair Base with Footrest(B). Step 2 Chair Base with Footrest(B) E F ① Non-woven Bag Place the Chair Base with Footrest(B) on a clean, non-marring surface. Lay Chair Backrest(A) and non-woven bag aside. Open the non-woven bag and take out the Legs and Gasket.
Turn the Chair Base with Footrest(B) upside down on a clean, non-marring surface. Take out 2 non-woven bags with Wings inside from the bottom of the mechanism. Then take out the Wings from non-woven bags. Step 4 Legs:Bevelled plane inside facing F E ① ① B Keep the Chair Base with Footrest(B) in the same position. First, install the Front Leg(E) at the bottom of the Chair by placing one Gasket① on the threaded stem.
With assistance from your adult partner, hold up the fully assembled backrest , stand behind the chair. Insert the small metal arms on the sides of the Chair Backrest into the prefabricated slide lock gadget on the Chair Base as shown above. Firmly but gently, push the Chair Backrest downwards until the Backrest is fully slotted and locked into position. Step 6 A C F B E Position the Chair Backrest(A) on it's left side.
Step 8 Velcro Smooth down the fabric flap on the Chair Backrest. Run your hands down both sides of the flap, from top to bottom, allowing the velcro tape to adhere to the flap under the seat of the chair. Your Push Back Chair is ready for use. Step 9 Make sure all parts are connected and securely locked into position. Your Chair is ready for use.
User Instructions. Please read the Instruction Manual below carefully before use. Supervise children, when in use of this Push Back Chair. Do not let Child stand in front or back of the Push Back Chair when open or close the footrest. Do not put you hands inside the Footrest when open or close the footrest. Do not seat any armrest of this Chair.
Page 9 OF 9
