Installation Instructions

PREPARING FOR INSTALLATION (Fig. 1)
1. Shut off power at the circuit breaker and remove the old
fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts in a
clear area. Take care not to misplace any small parts
necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. While supporting the fixture, connect the electrical wires as
shown in Fig. 2, making sure that all wire connectors (H) are
secured. If your post has a ground wire (green or bare
copper), connect the fixture ground wire to it. If not, consult
your electrician for proper grounding. After wires are
connected, tuck them carefully inside the post cup (I)
FINISHING THE INSTALLATION (Fig. 1)
4. Align the glass (B) into fixture body (E) and secure with glass
clips (C).
5. Attach body (E) to the top cover (A) with mounting screws
(D).
6. Attach the post (H) to the post cup (J) with the set screws (G).
7. Bulb information: (1 x AC LED 13W included.)
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
(NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Replacing LED module (Fig. 3)
The LED module can be replaced by a qualified electrician and shut off
the power at the circuit breaker and remove fixture from the outlet box
without cutting of wire and without damage to any decorative element to
which the fixture is attached. See installation steps for more details
(Fig 3.)
a. Carefully disconnect the wire covers (L). Remove the LED module
(G) from the nipple (K).
b. Carefully re-lamp the LED module (G). Note: The LED module
should be provided by a specified supplier.
Your installation is now complete. Return power to and
test the fixture.
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A
QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING
AND INSTALLATION.
Fig.3
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 2
Fig. 1
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or
Bare
Copper
(Ground)
INSTALLATION INSTRUCTIONS