Assembly Instructions

STEP 1

1.Screw 4 cam bolts (A) into the pre-threaded holes on the top board (1) by using a Philips

screwdriver.

2. Insert 4 wood dowels (C) into the dowel holes on the top board (1).

3. Attach the magnet (D) to the top board (1).

4. Insert 2 screws (O) through holes on the magnet (D) then tighten to top board (1) by using a Philip

screwdriver.

STEP 2

1.Screw 4 cam bolts (A) into the pre-threaded holes on the middle connection board (2) by using a

Philips screwdriver.

2.Insert 4 wood dowels (C) into the dowel holes on the middle connection board (2).