Assembly Instructions

STEP 15

1.Insert 4 screws (P) through holes on the middle connection board (2) then tighten to the bottom

left side panel (5) and bottom right side panel (6) by using a Philips screwdriver.

STEP 16

1.Place the top portion onto the middle connection board (2) by inserting the wood dowels into the

dowel holes and cam bolts into cam lock holes on the end of both top side panels (3),(4)

2. Insert 4 cam lock (B) into the cam lock holes on the both top side panel (3) (4), then rotate

clockwise to secure cam bolts in place by using a Philips screwdriver.