CAUTION : You must read this before you proceed LOVESEAT Picture Label Description QTY A Backrest 1 B Seat 1 C Leg 4 Description QTY Label 1 Picture Picture Dia.
Flat Washer Ring 7 3 Spring Washer Ring 7 4 Washer Ring (PVC) 7 5 Allen Key 1 Before Beginning Assembly: Step 1 Seat(B) Legs(C) + Hardwares Turn the Seat(B) upside down (preferrably on a surface that won't scratch the upholstery). Remove the non-woven fabric from under the Seat(B). Take out the four Legs(C) and the bag containing Hardwares.
Step 2 Seat(B) Backrest (A) Place the Backrest(A) faceup on the floor, then slide the Seat(B) into the housing. You will see 6 ( six ) attachment points. Attach the Seat(B) to Backrest (A) with the M8 Bolt(1) + Spring Washer Ring(3) + Flat Washer Ring(2) as shown. Use the Allen Key(5) to fasten all six bolts. Step 3 Seat(B) Backrest (A) Install the Legs (C) onto the Seat (B) and Backrest (A) by putting a Washer Rings (4) (optional but improve security and tightness) onto the theaded stem.
Step 5 Turn the loveseat to its upright position. It is now ready for use.
