ASSEMBLY INSTRUCTION ROUND TOP SHAPE FULL SIZE BED Headboard H Foot board Extension Leg I dice rail 1pc 1pc PCs PCs H sets Il Cross bar Support Leg Bolt m apes apes PCs PCs Bolt [j Brit § Brit [§ Fiat Washer . 1/4" 44mm . . PCs PCs PCs PCs Nut Allen Wrench E Wrench PCs 1pc 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Assemble the cross bar (F} to the extension leg (C) with 4 bolt (K) and fastened using Allen wrench (N).
fastened using wrench (O) but do not tighten them completely until the foot board is also assemble. Next, attach foot board (B} to the other ends of side rail {D} and assemble each with 2 bolt (1),2 flat washer fastened using Allen wrench (N) now,tighten all the bolts and nuts completely.
Assemble the slat E} to the side rail {D) with 2 flat washer(L), 1 nut (M) and 1 bolt (J) for two ends of each sit, then fastened using Allen wrench (N) and wrench (O). Cleaning&Care Treat surface with care. Surface is resistant o scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
