Installation & Assembly

2. Prepare 6 bolt
assemblies by
first inserting a
lock washer (#B)
onto the bolt (#A)
then a flat washer
(#C) onto that
same bolt (#A).
1. Carefully place the table top (#1)
face down onto a protected surface.
3. Align the top of the legs (#2)
to corner holes on the table top
(#1). Then insert 2 bolt assemblies
into each corner and secure using
the Allen wrench (#D).
1. Prepare 3 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align the table shelf (#3) to the holes along the top
of three legs (#2), then insert a bolt assembly into
each corner and secure using the Allen wrench (#D).