Assembly Instructions

A
1
D
4
E
12
C
4
F
12
H
12
Table top
Table leg
G
12
F
E
G
D
A
C
Bolt
Lock washer
Flat washer
Nut
Nut cap
Parts list Parts picture Description
Q'ty
Parts list Parts picture Description
Q'ty
1. Turn the table top(A) upside down on the soft clean surface. Loosely atta ch 4 bolts (D) to the table top.
Tighten the bolts at this time.
2. Loosely attach the 4 legs(C) to the table top with flat washers(E), lock washers(F), nuts(G) and nut caps(H).
DO NOT tighten the nuts.
3. Loosely attach each of the center plates(B) to the legs. Note that the recessed end of each plate goes on
the leg last at each corner. Secure using flat washers, lock washers, nuts and nut caps.
4. Tighten all the bolts and nuts completely. DO NOT over-tighten.
5. Turn the table onto its legs and use the adjuster feet to level the tables.
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
ATTENTION:
ASSEMBLY INSTRUCTIONS
11
22
44
33
H
Warning : please do not use acid or alkaline washing liquid to clean the product.
Assembly step:
B
4
Long center plate
B
(M8*40)