Technical Specifications

Oil Spot Primer - Professional Grade
Oil Spot Primer
Professional Grade
Revised: 03/08
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest Oil Spot Primer is a polymer latex
emulsion designed to seal oil and gasoline stains
prior to applying SealBest Driveway Sealer.
Improves adhesion of driveway sealer to stained
areas. Reduces the occurrence of oil bleeding
through freshly applied sealer.
Uses
• Seals&PrimesOil&GreaseSpotsOn
Asphalt Driveways
•ImprovesAdhesionOfDrivewaySealer
•ReducesOilSpotBleed-Through.
Coverage
One .9 quart will cover approximately 30-50 square
feet (one coat).
Directions
Clean Oil Spots - Scrub oil and grease stains with
stiff brush or broom, household detergent, and
water. Rinse thoroughly with water.
Applying
Mix contents of container by moderate shaking.
Cut top of spout to allow material to flow out of
container. Apply oil spot primer to stained areas.
Spread with paint brush or other suitable brush.
Allow oil spot primer to dry completely. A second
coat of oil spot primer may be applied for added
bleed through resistance. Oil Spot Primer must be
completely dry before applying driveway sealer.
Clean Up
Wash hands, tools, and applicator brush with soap
and water before material dries. If material has
dried use paint thinner.
Ingredients: Cas No.
Polymer Latex Proprietary
Water 7732-18-5
www.homedriveway.com