Technical Specifications

High Performance Driveway Patch - Fast Drying
High Performance Driveway Patch
Fast Drying
Revised: 03/08
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest High Performance Driveway Patch is a
heavy-bodied fast-drying asphalt emulsion fortified
with mineral aggregate. It is designed for filling
large cracks and small holes in asphalt pavement.
Uses
Designed for filling large cracks and small holes in
asphalt pavement.
Coverage
Ultimate coverage will be determined by depth and
width of repair.
Directions
Clean Cracks - Use a screwdriver, wire brush or
other suitable tool to remove dirt, debris, and
vegetation from cracks. Flush out cracks with hose
and water. Allow cracks to dry prior to filling.
Applying
Fill cracks, ruts, or depressions with SealBest High
Performance Driveway Patch and trowel smooth.
A rectangular trowel works best. Allow Driveway
Patch to cure for 24 hours prior to applying
SealBest Driveway Sealer.
Important
Read entire label before using. Application
temperature must be a minimum of 60 °F and
rising. Do not apply when temperature is expected
to drop below 60 °F within a 24 hour period. Be
sure to wear eye protection when working with
this product.
Clean Up
Wash hands and tools with soap and water before
material dries. If material has dried, use paint
thinner.
Ingredients: Cas No.
Asphalt 8052-42-4
Clay 1332-58-7
Silica Sand 14808-60-7
Polymer Latex Proprietary
Water 7732-18-5
Fiber NA
www.homedriveway.com