Technical Specifications

Elastomeric Pourable Crack Filler - Professional Grade
Elastomeric Pourable Crack Filler
Professional Grade
Revised: 03/08
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest Elastomeric Pourable Crack Filler is a
professional grade flexible asphalt emulsion crack
filler designed for sealing cracks up to 1/2” wide in
asphalt pavement surfaces. Dries black.
Uses
Fills cracks up to 1/2” wide in asphalt driveways.
Seals Out Moisture.
Coverage
.9 gallons of SealBest Elastomeric Pourable Crack
Filler will fill approximately 75-150 feet of cracks.
Ultimate coverage will be dependant upon depth
and width of cracks.
Directions
Clean Cracks - Use a screwdriver, brush or other
suitable tool to remove dirt, debris, and vegetation
from cracks. Clean out cracks with water. Allow
cracks to dry prior to filling.
Applying
Mix contents of container by moderately shaking.
Cut top of spout to desired width (smaller than
width of crack). Fill cracks even to adjoining
pavement. Allow crack filler to dry for 24 hours. If
desired, a second application of crack filler may
be applied to compensate for shrinkage from
evaporation of the first application. Allow crack
filler to dry for 24 hours prior to applying driveway
sealer.
Important
Read entire label before using. Application
temperature must be a minimum of 60°F and
rising. Do not apply when temperature is expected
to drop below 60°F within a 24 hour period. Be
sure to wear eye protection when working with
this product.
Clean Up
Wash hands and tools with soap and water before
material dries. If material has dried, use hand
cleaner on hands and paint thinner on tools.
Ingredients: Cas No.
Asphalt 8052-42-4
Clay 1332-58-7
Polymer Latex Proprietary
Water 7732-18-5
www.homedriveway.com