Technical Specifications

www.DuckCoat.com
Coverage (Approximate)
• Non-single ply rubber roof membranes (i.e. Built-up,
metal, asphalt, concrete, Polyurethane, etc.): One 4.75
gallon pail will provide enough material for 2 coats over
an area of approximately 175-200 square feet.
• For single ply rubber roof membranes (i.e. EPDM,
TPO, Hypalon): One 4.75 gallon pail will provide
enough material for 1 primer coat and 2 coats over an
area of approximately 135-150 square feet.
Precautions
• Do Not Freeze
• Do Not Store At Temperatures Below 50 ºF
Safety And Environmental Precautions
• Refer To Material Safety Data Sheet Before Using
• For Exterior Application Only
• Close Container When Not In Use
• Environmental Information Is On The Material
Safety Data Sheet
• Do Not Reuse Empty Container
• Volatile Organic Content (VOC) Is 550 gm/liter max
• KEEP OUT OF REACH OF CHILDREN
• CAUTION! COMBUSTIBLE
CONTAINS PETROLEUM DISTILLATE. Keep away from
heat, spark and flame. To avoid breathing vapors or
spray mist, open windows and doors or use other
means to ensure fresh air entry during application and
drying. If you experience eye watering, headaches
or dizziness, increase fresh air or wear respiratory
protection (NIOSH/MSHA TC 23C or equivalent) or
leave the area. Close container after each use. Avoid
contact with skin. USE WITH ADEQUATE VENTILATION.
• NOTICE - Reports have associated repeated and
prolonged occupational overexposure to solvents
with permanent brain and nervous system damage.
Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful or fatal.
INGREDIENTS CAS No.
Parachlorobenzotrifluoride
Dimethyl Carbonate
Aromatic Petroleum Distillates
Calcium Carbonate
Titanium Dioxide
Rubber Compounds
Silicon Dioxide
98-56-6
616-38-6
64742-95-6
1317-65-3
13463-67-7
NA-Mixture
7631-86-9