Technical Specifications

Premium
Fibered Aluminum Roof Coating
Revised: 11/15
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest
®
Fibered Aluminum Roof Coating
is a premium professional grade contractor
proven blend of select waterproofing asphalts
and high quality leafing aluminum pigments.
When applied as directed, it cures to a brilliant
decorative coating, providing maximum protection
and durability against the elements. It reflects
up to 90% of the sun’s rays and reduces roof
temperature by 15-20°F., increasing roof life and
lowering energy costs.
Uses
• Metal Roofs
• Concrete Roofs
• Built-Up Roofs
• MOD. Bitumen SBS/APP
• Weathered Asphalt Coatings
• Metal Buildings/Grain Bins
• Mobile Homes
• And More
Surface Preparation
Repair all cracks, splits, and holes using SealBest
Plastic Roof Cement and Asphalt Coated Glass
Fabric, adhering to the directions on their label.
Allow repairs to weather at least 30 days before
coating. Clean surfaces thoroughly by brooming
away dirt, dust and loose particulate. Remove all
grease and oil using detergent and water, rinsing
thoroughly. Broom away excess water and allow to
dry completely.
Application
Mix coating thoroughly before and during
application. Uniformly coat the entire surface with
the coating using a roofing brush or roller. Do not
apply if rain or heavy dew is expected within 24
hours of application. Do not apply to wet or damp
surfaces. Do not apply if temperature is expected
to fall below 50°F. within 12 hours of application.
Clean up with waterless hand cleaner immediately
after use. Do not apply to roofs which hold water.
Standing water will result in premature failure.
Drying Time
Allow 24 hours depending on weather conditions.
Clean Up
While wet, use soap and water.
Weather Conditions
• Do not apply if rain is imminent or forecast
within 24 hours of application.
Coverage (Approximate)
Metal Roofs: 75-100 sq. ft. per gallon
Composition Roofs: 50-75 sq. ft. per gallon
Precautions
• Do Not Freeze
• Do Not Store at Temperatures Below 50 ºF
• CAUTION! COMBUSTIBLE
Safety And Environmental Precautions
• Refer to Material Safety Data Sheet Before Using
• For Exterior Application Only
• Close Container When Not in Use
• Environmental Information is on the Material
Safety Data Sheet
• Do Not Reuse Empty Container
• CONTAINER MAY BE HAZARDOUS WHEN EMPTY
as container may contain product residues and/
or combustible vapors. All labeled hazardous
precautions must be observed. Dispose of empty
container in accordance with local, state or federal
regulations
• Volatile Organic Content (VOC) is 500 gm/liter
max
• KEEP OUT OF REACH OF CHILDREN
Ingredients: Cas No.
Asphalt 8052-42-4
Stoddard Solvent 64742-88-7
Aluminum Flake 7429-90-5
Cellulose 9004-34-6
Calcium Carbonate 1317-65-3
www.sealbest.com