Technical Specifications

Asphalt Coated Reinforcing Fabric
STRENGTHEN REPAIRS
Revised: 11/15
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
A fiberglass reinforced fabric for strengthening
repairs.
Uses
Use with Roof Cement to Strengthen Repairs On:
• Cracks
• Flashing
• Gutters
• Seams
• Blisters
• And More
Surface Preparation
For best results, surface shall be clean, dry and
free of any dirt or contaminants.
Application
CRACKS, BREAKS, LOOSE SEAMS
Clean area of loose dirt and debris. If moisture
is present allow area to dry. Apply roof cement
to defective area. Extend coating to three inches
beyond area to be repaired. Spot stick reinforcing
fabric in position over defect. Press into place. Top
coat with roofing cement.
FLASHINGS
Spread roof cement into cracks extending 3” to
each side of crack. Firmly press reinforcing fabric
into coating and top coat with more roof cement.
GUTTERS
Clean gutter of dirt and rust. Dry area to be
patched if wet. Place heavy coating of roof cement
over defective area. Firmly press reinforcing fabric
into coating and top coat with more roof cement.
BLISTERS
Leaking blisters should be slit in a criss-cross
pattern and folded open. Damaged materials
should be removed. Allow area to dry if wet.
Apply roof cement to opened area with putty knife
or trowel. Replace criss-cross cut material to close
opening. Press into place. Cover area with roof
cement. Extend coating 3” beyond defective area.
Firmly press reinforcing fabric into coating and top
coat with more roof cement.
Coverage (Approximate)
• 6 inches wide by 50 feet.
Safety And Environmental Precautions
• Refer To Material Safety Data Sheet Before Using
• For Exterior Application Only
• Environmental Information is on the Material
Safety Data Sheet
• KEEP OUT OF REACH OF CHILDREN
www.sealbest.com