Product Manual

VENDOR TO REMOVE AREA BELOW DASHED LINE AFTER PRINTING
B20460 ECN-15100 (1007)
VENDOR TO REMOVE AREA BELOW DASHED LINE AFTER PRINTING
B20460 ECN-15100 (1007)
11
2
PAGE 2 OF 12 PAGE 11 OF 12
Removing Paint
Killing Weeds
CAUTION:
•
DO NOT smoke around or expose supply tank(s) to open flames or sparks.
Storage:
Never store a torch that is still hot. When the torch is stored indoors, the
connection between the LP gas tank(s) and the device must be disconnected,
and the tank(s) removed from the device and stored outdoors in accordance with
Chapter 5 of the “Standard for the Storage and Handling of Liquefied Petroleum
Gases”, ANSI/NFPA 58.
CAUTION:
•
••
•
DO NOT smoke around or expose supply tank(s) to open flames or sparks.
•
The hose assembly shall be protected from traffic, crushing, and hot surfaces.
This may cause premature wear of the hose.
• DO NOT lift tank by the valve. Lifting the tank by the valve may result in
damage to the valve.
NOTE:
•
Storage temperature shall not exceed 120° F (49° C).
• Place tank on level surface in an upright position. Do not invert or lay tank on
its side.