User's Manual

2
BRIEF
PowerMon-5S is a Bluetooth Low Energy Swiss-army knife tool that can be used in any DC circuit. Its
primary function is advanced battery monitor / DC power meter. PowerMon-5S allows monitoring of important
electrical parameters: voltage (0-65V), current (0-500A bidirectional), peak current, power (W), energy (Wh),
battery charge (Ah) and temperature. Many other parameters are computed: the battery state of charge (SoC)
as a percentage, remaining time on battery, battery statistics (number of cycles, total discharged capacity, …).
The device can log the measured data for up to 3 years, allowing for advanced data analysis and troubleshooting.
PowerMon-5S logs data in an internal memory as opposed to inside the mobile application which makes our
product better than our competitor’s. The device can drive a mechanical or solid-state relay which allows it to
function as a low voltage disconnect, high voltage disconnect, over-current disconnect, temperature controller,
remote on/off switch, timer, and finally, generator control. A mobile device running either Android or iOS and
the PowerMonX app (available for free on Google Play Store and Apple App Store) are required for using this
device.