Owner's Manual
22
Rear wheel removal with external gear mech
Removal of the wheel:
1. Ensure that the shier is in gear 14.
2. If the bike has V brakes, release the V brake pipe.
3. Unscrew the cable box thumbscrew see picture below le).
5. Remove the cable box.
6. Quick release the skewer.
7. Li out the wheel.
Replacement of the wheel:
1. Locate the chain on the sprocket.
2. Ensure that the mini an-rotaon torque arm ts into the deep slot on the LH
dropout (see picture below right).
3. Tighten the quick release skewer.
4. Check that the shier sll reads ‘14’.
5. Replace the cable box and ghten the thumbscrew.
6. Ensure you reinstall the V brake pipe if you have removed.
Thumbscrew
Mini anti-rotation torque arm