Owner's Manual

21
Rear wheel removal with internal gear mech
Removal of the wheel:
1. Release the V brake pipe.
2. Quick-release the two Rohlo cables by twisng them through 90 degrees (see
picture below le).
3. Quick release the skewer.
4. Li out the wheel.
Replacement of the wheel:
1. Locate the chain on the sprocket.
2. Ensure that the mini an-rotaon torque arm ts into the deep slot on the LH
dropout (see picture below right).
3. Tighten the quick release skewer.
4. Ensure you reinstall the V brake pipe.
Mini anti-rotation torque arm